Using the Mold Test Kit
Steps for finding mold
Seal & Label
What do I need?
Your Mold Test Kit
If you are here, you’ve received your mold test kit in the mail and are ready to get testing.
Have you registered your kit?
Evaluate What Needs to be Tested.
Evaluate all areas that should be tested including vehicles and even pets.
Test areas that are known or suspected of having water leaks (e.g. – roof leaks, flooding, pipe leaks, etc.) If specific areas cause sneezing and coughing, they should be included. Include more than one mold plate in large areas or rooms.
We recommend testing each of the following areas:
Office (Home & Work)
Test Your Rooms, Cars, Pets and Surfaces for Mold.
Test as soon as possible, but do not open mold plates until you are ready to use them.
When testing a room, select an area to place a mold plate that is at least 2 feet from the wall.
Remove the mold plate lid and place bottom (contains yellow agar) on a flat surface to test for one hour.
Review this preparation checklist before sampling.
Keep windows closed for at least six hours prior to testing.
Don’t turn on air conditioning unless that is part of your normal activity. However, do turn on the central fan of the heating and air conditioning system.
Don’t sweep or vacuum just before the test.
Rooms can be used as normal during sampling including children and pets. Please ensure pets don’t touch or lick plates.
When testing a vehicle, keep windows and doors closed during the entire process, other than entering and exiting the vehicle.
Remove the mold plate lid and place a plate on a paper towel on the front passenger’s seat or center console.
Turn on your engine and let the air-conditioner or heater blow for 30 minutes on re-circulate (Max). Turn off the car and let the plate sit for another 30 minutes.
Tap test when testing a particular piece of furniture, rug, car seat, carpeting, pillow, sofa, pet, or any textile.
Wash & dry your hands thoroughly prior to testing.
Hold the plate so the yellow agar is facing towards the object or pet. Tap the object 4 times (The yellow agar should not touch the object). This will force the mold spores into the air and onto the plate.
Swab any potential visible mold.
Swab the area to be sampled until the end of the swab is discolored. Cover as much of the swab as possible with the potential mold.
Seal & Label
Seal With Stickers and Label Bottom of Your Samples.
For each sample fill out 2 labels, one for the sample and one for the lab analysis form. Use 2 stickers per sample for a proper seal.
Mold Sample Label
Create a label for each sample with a unique name and the date and time of testing. Place it on the swab container or on the bottom of the plates (the darker side with the agar).
Lab Sample Label
Create a second label for each sample with matching information for the Lab Processing Form.
Analyze Your Samples
Seal and Store
Ensure all of your samples are sealed, labeled and placed in foil bags.
Store in dark place
Place foil bags in a warm (68 – 85ºF), dark place such as a kitchen cabinet or desk drawer.
Wait 5-7 days
After 5 to 7 days pull the samples out for analysis. If there is no mold growth, place the samples back in the foil packet and reanalyze after 7 to 8 days.
Check for Mold
Hold a mold plate up to a light and count the number of colonies (circles) growing on the agar. Compare to our health scale. Size of the circles is not important.
Read your gravity plates
Colony Count and Health Effects*
0 to 4 total fungal colonies per area (room)
Is within a normal range for sinus health.
5 to 8 total fungal colonies per area (room)
Is cause for concern-illness is probable in individuals who are susceptible.
9 or greater total fungal colonies per area (room)
Is hazardous-illness likely in individuals who are susceptible.
Lab must receive sample within 10 days of sampling.
Ensure your shipping method will deliver your samples in time.
Place Samples in the Protective Bag and then in the box.
Only include the samples you would like analyzed.
Fill out the Lab Processing form and place in the box.
Follow the instructions on the Lab Processing Form.
Fill with packing material and send the kit to the lab.
ImmunoLytics • 5930 Midway Park Blvd. NE • Albuquerque, NM 87109
Next Steps for Treatment
Speak with our Environmental Experts or Consulting Pharmacist to determine what steps are required to make your environment healthy. We are here to answer your questions and provide guidance as you navigate through the process to improve your environment and your health.
Scheduled call with our experts
Actionable Steps to Restore Your Environment
Recommended Partners to Treat Every Case
Natural Products & Affordable Options